|
SV10 Floating Seal Solenoid Valve
|
SV10
Catalog Information (2 pgs./69KB)
|
Introduction:
Valcor Scientific has designed and engineered rugged, reliable solenoid operated valves
for more than 40 years.
The SV10-Series was specifically engineered for controlling non-corrosive gases, light
oils or light particulate liquids in the industrial markets.
Description:
The SV10 is a direct-acting, 4-port, 4-way solenoid valve, with ports on each side of
the brass body.
These valves are primarily designed for controlling double-acting air or hydraulic
cylinders with non-corrosive gases, light oils or light particulate liquid.
No minimum pressure is required for operation, and less than 1 psig minimum pressure
differential in the direction of flow is required for drip-tight sealing.
The SV10-Series employs Valcor's unique "Floating Seal" design, which
utilizes an optically flat Delrin seal disc against an equally flat stainless steel seat.
The straight-through flow and self-lapping of the discs make the valves less susceptible
to contaminants in the fluid.
Applications:
Model SV10 is suitable for a broad range of light industrial applications, both new and
retrofit. Typical applications employing the model SV10 include:
 | Cryo pumps for analytical instrumentation |
| Air dryers in various industrial applications |
| Actuating cylinders in packaging equipment |
|
Specifications:
| Size: 3.1" (h) x 2.2" (w) x 1.5" (d) |
| Weight: 20 oz. |
| Port Connection: 1/4" NPT female |
| Wetted Materials: Brass, Stainless Steel, Neoprene, Delrin |
| Coil Construction: UL Class "B", 18" leads (AC valves); UL Class
"H" 10" leads (DC valves) |
| Power: 10 watts (115/60Hz); 15 watts (24V DC) |
Features:
| Construction minimizes fluid contamination problems |
| No minimum pressure required for operation |
| Compact construction |
| Designed to employ Valcor's unique "Floating-Seal" design for straight-through
flow. |
|
SV12 Floating Seal Solenoid Valve
|
SV12
Catalog Information (2 pgs./481KB) |
Introduction:
Valcor Scientific has designed and engineered rugged, reliable solenoid operated valves
for more than 40 years.
The SV12-Series was specifically engineered to permit the high flow of non-corrosive
fluids, light particulate liquids or gases.
Description:
The SV12 is a direct-acting, 2-way normally-closed solenoid valve. These valves are
designed to permit the high flow of non-corrosive fluids, light particulate liquids
or gases, with no minimum pressure required for operation. They require less than 1 psig
minimum pressure differential in the direction of the flow for drip-tight sealing.
Utilizing Valcor's unique "Floating Seal" design, which uses an optically flat
Teflon seal disc against an equally flat stainless steel seat.
Because of the straight-through flow and self-lapping of the disc against the seat,
contamination and leakage is minimized.
The SV12 is available with two orifice sizes.
Applications:
Model SV12 is suitable for a broad range of light industrial applications, both new and
retrofit. Typical applications employing the model SV12 include:
| Vacuum pumps and air monitors in analytical instrumentation |
| Water control for food/beverage markets |
| Wafer cleaning in semi-conductor industry |
|
Specifications:
| Size: 2.7" (h) x 1.6" (w) x 1.5" (d) |
| Weight: 14 oz. |
| Port Connection: 1/4" NPT female |
| Wetted Materials: Brass, Stainless Steel, Teflon, Buna N and Silver (AC valves), Viton
(DC valves) |
| Coil Construction: UL Class "B", 18" leads (AC valves); UL Class
"H" 10" leads (DC valves) |
| Power: 10 watts (115/60Hz); 15 watts (24V DC) |
Features:
| No minimum pressure required for operation |
| Construction designed to minimize fluid contamination problems |
| Compact construction with low pressure drop across the valve |
|
SV61 Multi-Purpose Solenoid Valve
|
SV61
Catalog Information (2 pgs./1158KB) |
Introduction:
Valcor Scientific has designed and engineered rugged, reliable solenoid operated valves
for more than 40 years.
The SV61-Series was specifically engineered for long and reliable general industrial
service with non-corrosive liquids, gases and vapors.
Description:
The SV61 is a direct-acting, 2-way normally-closed poppet solenoid valve. When
de-energized, the plunger is held down on the valve seat by means of a spring load. When
energized, the plunger is lifted from the seat, allowing media to flow through the valve.
Ruggedly built for long life and reliable service, the SV61 requires no minimum
pressure for operation.
The SV61 is available in three orifice sizes.
Applications:
Model SV61 is suitable for a broad range of light industrial applications, both new and
retrofit. Typical applications employing the model SV61 include:
| Flavor dispensing, syrup and water control in food/beverage industry |
| Dialysis equipment, angioplasty instrumentation |
| Point-of-purchase displays for packaging industry |
| Wafer polishers for semiconductors |
|
Specifications:
| Size: 2.8" (h) x 1.7" (w) x 1.5" (d) |
| Weight: 9.3 oz. |
| Port Connection: 1/4" NPT female |
| Wetted Materials: Polypropylene, Stainless Steel, Silver (AC valves only), Buna N |
| Coil Construction: UL Class "B", 18" leads |
| Power: 10 watts |
Features:
| Direct acting design with bubble-tight shutoff |
| No minimum pressure required for operation |
| Rugged construction with stainless steel trim |
| Polypropylene body constructed of FDA listed material |
|
SV62 Multi-Purpose Solenoid Valve
|
SV62
Catalog Information (2 pgs./1157KB) |
Introduction:
Valcor Scientific has designed and engineered rugged, reliable solenoid operated valves
for more than 40 years.
The SV62-Series was specifically engineered for long and reliable general industrial
service with non-corrosive liquids, gases and vapors.
Description:
The SV62 is a direct-acting, 2-way normally-closed poppet solenoid valve. When
de-energized, the plunger is held down on the valve seat by means of a spring load. When
energized, the plunger is lifted from the seat, allowing media to flow through the valve.
Ruggedly built for long life and reliable service, the SV62 requires no minimum
pressure for operation.
The SV62 is available in three orifice sizes.
Applications:
Model SV62 is suitable for a broad range of light industrial applications, both new and
retrofit. Typical applications employing the model SV62 include:
| Water control in automated sinks |
| Fuel shutoff in various industrial markets |
| Oxygen control in various medical applications |
|
Specifications:
| Size: 2.8" (h) x 1.7" (w) x 1.5" (d) |
| Weight: 14.8 oz. |
| Port Connection: 1/4" NPT female |
| Wetted Materials: Brass, Stainless Steel, Silver (AC valves only), Buna |
| Coil Construction: UL Class "B", 18" leads |
| Power: 10 watts |
Features:
| Direct acting design with bubble-tight shutoff |
| No minimum pressure required for operation |
| Rugged construction with forged brass body and stainless steel trim |
|
SV84 Multi-Purpose Solenoid Valve
|
SV84
Catalog Information (2 pgs./1059KB) |
Introduction:
Valcor Scientific has designed and engineered rugged, reliable solenoid operated valves
for more than 40 years.
The SV84-Series was specifically engineered for controlling steam, water, gas, oil and
other non-corrosive fluids in a variety of industrial markets.
Description:
The SV84 is a 2-way, direct-acting balanced poppet solenoid valve that can be used in
normally-closed configurations.
The direct acting design eliminates pilot pistons and holes, which can stick or become
congested.
Balanced poppet solenoid valves are unique inasmuch as they open and close independent
of the operating pressure and require no minimum operating pressure.
the model SV84 is designed for continuous duty service with water, gas, oil, steam and
other non-corrosive fluids.
Applications:
Model SV84 is suitable for a broad range of light industrial applications, both new and
retrofit. Typical applications employing the model SV84 include:
| Drain fire stand pipe |
| High pressure washer water control |
| Fuel inlet to large burners |
|
Specifications:
| Size: 6.2" (h) x 4.4" (w) x 4.0" (d) |
| Weight: 7.3 lbs. |
| Port Connection: 1" NPT female |
| Wetted Materials: Bronze body, stainless steel and elastomeric seals (Viton, Buna or
EPDM) |
| Coil Construction: UL Class "H" 10" leads |
| Power: 23 watts (115/60Hz) |
Features:
| Direct-acting design: no minimum operating pressure |
| Elimination of pilot holes to reduce chance of clogging |
| Fail-safe position in the event of power interruption |
| Line mountable |
| Weatherproof housing option available upon request |
|
SV85 Multi-Purpose Solenoid Valve
|
SV85
Catalog Information (2 pgs./1090KB) |
Introduction:
Valcor Scientific has designed and engineered rugged, reliable solenoid operated valves
for more than 40 years.
The SV85-Series was specifically engineered for controlling steam, water, gas, oil and
other non-corrosive fluids in a variety of industrial markets.
Description:
The SV85 is a 3-way, direct-acting balanced poppet solenoid valve that can be used in
diverter, normally-open or normally-closed configurations.
Its vertical, upright mounting orientation allows for a fail-safe position in the event
of power failure.
Because balanced poppet solenoid valves are direct-acting (open and close independent
of the operating pressure), they are uniquely designed to require no minimum operating
pressure. In addition, this design eliminates pilot pistons and pilot holes, which can
stick or become clogged.
Applications:
Model SV85 is suitable for a broad range of light industrial applications, both new and
retrofit. Typical applications employing the model SV85 include:
| Water diverters in car washing equipment |
| Circulation controller in high pressure water washers |
| Zero (use a delta) drain down in fire stand pipe |
|
Specifications:
| Size: 8.6" (h) x 4.5" (w) x 4.0" (d) |
| Weight: 7.3 lbs. |
| Port Connection: 1" NPT female |
| Wetted Materials: Naval Bronze body, stainless steel and elastomeric seals (Buna or
EPDM) |
| Coil Construction: UL Class "H" 10" leads |
| Power: 23 watts (115/60Hz) |
| Orientation: Valve must be mounted in vertical, upright position |
Features:
| Direct-acting design: no minimum operating pressure |
| Elimination of pilot holes to reduce chance of clogging |
| 625 PSIG pressure capability |
| Bubble-tight shutoff |
| Fail-safe position in the event of power interruption |
| Line mountable |
|
Don't know which
valve to use? Download the Valve
Application Data Sheet. (2 pgs./16KB)
|
