 | The DL-50 Series is a compact and
robust design which employs a unique "Dual Piston" setup
that enables the users to control pressures up to 6,000 psig with as
little as 100 psig of dome pressure. All of this is accomplished
within the smallest envelope the industry has to offer. |
|
The regulator portion of this unit was patterned after the
time-tested PR-50 series, which is widely recognized as a benchmark of
performance and quality. Offering the utmost in economy and safety, this
unit is constructed from 316L stainless steel. A carefully engineered
diaphragm/piston sensor unit offers good sensitivity and repeatability.
|
Completing this design is the addition of an anodized aluminum (316
stainless steel optional) dome unit. The inlet ring to the dome is
freely rotating and captured by a high tensile snap ring. This feature
allows easy positioning and alignment of the dome gas line within a
customer's system while maintaining excellent leak integrity.
|
| The DL-56 Series is a compact and
robust design which employs a unique "Dual Piston" setup
that enables the users to control pressures up to 6,000 psig with as
little as 40 psig of dome pressure. All of this is accomplished within
the smallest envelope the industry has to offer. |
|
The regulator portion of this unit was patterned after the
time-tested PR-56 series, which is widely recognized as a benchmark of
performance and quality. Offering the utmost in economy and safety, this
unit is constructed from brass alloy 360. A carefully engineered all
316L stainless steel piston sensor unit offers good sensitivity and
repeatability. An independent test was run and showed that the unit's
ability to repeat to a set point and low operating hysteresis is
unsurpassed throughout the industry.
|
Completing this design is the addition of an anodized aluminum (316
stainless steel optional) dome unit. The inlet ring to the dome is
freely rotating and captured by a high tensile snap ring. This feature
allows easy positioning and alignment of the dome gas line within a
customer's system while maintaining excellent leak integrity.
|
| The DL-57 Series is a compact and
robust design which employs a unique "Dual Piston" setup
that enables the users to control pressures up to 10,000 psig with as
little as 58 psig of dome pressure. All of this is accomplished within
the smallest envelope the industry has to offer. |
|
The regulator portion of this unit was patterned after the
time-tested PR-57 series, which is widely recognized as a benchmark of
performance and quality. Offering the utmost in safety and corrosion
prevention, this unit is constructed from 316L stainless steel. A
carefully engineered piston sensor unit offers good sensitivity and
repeatability. An independent test was run and showed that the unit's
ability to repeat to a set point and low operating hysteresis is
unsurpassed throughout the industry.
|
Completing this design is the addition of an anodized aluminum (316
stainless steel optional) dome unit. The inlet ring to the dome is
freely rotating and captured by a high tensile snap ring. This feature
allows easy positioning and alignment of the dome gas line within a
customer's system while maintaining excellent leak integrity.
|
| Responding to the needs of the industry for a simple, safe and
effective way to remotely load high pressure regulators, GO Regulator
designed and developed a line of low profile dome loading units. |
|
The DL-59 Series is a compact and
robust design which employs a unique "Dual Piston" setup that
enables the users to control pressures up to 4,000 psig with as little
as 36 psig of dome pressure. All of this is accomplished within the
smallest envelope the industry has to offer.
|
The regulator portion of this unit was patterned after the
time-tested PR-59 series, which is widely recognized as a benchmark of
performance and quality. Offering the utmost in safety and corrosion
prevention, this unit is constructed from 316L stainless steel. A
carefully engineered piston sensor unit offers good sensitivity and
repeatability. This is coupled with the large Cv of the PR-59 of 1.20.
|
Completing this design is the addition of an anodized aluminum (316
stainless steel optional) dome unit. The inlet ring to the dome is
freely rotating and captured by a high tensile snap ring. This feature
allows easy positioning and alignment of the dome gas line within a
customer's system while maintaining excellent leak integrity.
|
Typically, the low pressure gas to the dome is controlled by the
PR-11 (optional) with a range of 0-250 psig and self-relieving option.
|
|
 The
complete Dome-Loaded Regulators catalog is available for download
(13 pgs./225KB).
|
